applications when a fast, durable and economical solution is required.
USES: Use CONCRETE LEVELER when a high quality , fast-setting, self-leveling
underlayment is needed. CONCRETE LEVELER is ideal for all oor projects that need long
ow life and working time while achieving high 24-hour strength. CONCRETE LEVELER is
an excellent choice for new oor projects and repair projects.
ENVIRONMENT AL ADVANT AGES: Use CONCRETE LEVELER to reduce your carbon
footprint and lower your environmental impact. Production of Rapid Set cement emits far
than portland cement. Contact your Rapid Set representa tive for LEED values
and further environmental information.
SURF ACE PREP ARA TION: Substra te must be clean, sound concrete that is free of g ypsum
compounds and all materials that may inhibit bond such as: oil, curing compound, dust,
mastic, bond breakers, and other surface contaminants. Concrete vapor emission rates
should comply with the nished ooring manufacturer’ s requirements. Smooth concrete
and hard-troweled surfaces must be prepared to achieve a surface prole similar to ICRI
CSP 3. Mechanical methods of surface preparation, such as shot blasting, are preferred.
Acid etching is not recommended. Surface must be dry and be between 50°F and 90°F
(10°C and 32°C), and be properly primed. Honor all moving joints and cracks.
PRIMING: Apply Ra pid Set
Concrete Leveler
Primer to all substrate surfaces prior to
placement. Follow the application instructions sta ted on the primer product packaging.
APPLICA TION: Apply CONCRETE LEVELER up to 2" (5.1 cm) thick. F or thicknesses
greater than 2" (5.1 cm), extend each 50-lb (22.7-kg) bag with 25 lb (11.3 kg) of clean,
dry 3/8" (0.95 cm) pea gra vel. When extended with aggrega te, CONCRETE LEVELER may
be placed up to 5” (12.7 cm) thick.
MIXING: Add one 50-lb (22.7-kg) bag of CONCRETE LEVELER to 4.5 to 5 quarts
(4.3 L to 4.7 L) of potable water . Do not exceed 5 quarts (4.7 L) of water . CONCRETE
LEVELER may be mixed using a drill-mounted paddle mixer , or by using an appropria te
mixer and pump. Mix 3 to 5 minutes until the mixture is smooth and lump free. Avoid
mixers that entrap large amounts of air . Mixed CONCRETE LEVELER should be placed
within 20 minutes at 70°F (21°C). Maintain material temperature between 60°F and 80°F
(16°C and 27°C).
PLACEMENT : When primer is completely dry , pour or pump CONCRETE LEVELER. Use a
gauge rake, spreader or other tools to place the material. Use a Rapid Set
Spiked Roller
to remove any entrapped air . A smoother tro wel may be used to smooth the material.
CONCRETE LEVELER can be troweled to a featheredge to ma tch existing elevations.
CONCRETE LEVELER
Quick-Setting, Self-Leveling Floor Underlayment
Highlight s:
Interior/Exterior: Formulated with Rapid
Set hydraulic cement. Provides long-life
durability in wet and dry environments *
Quick Setting: Minimizes downtime. Ready
for foot trafc in 2 to 4 hours. May be
used as a temporary work surface prior to
installation of nished ooring
High Strength: Achieves 3000 psi (20.7 MPa)
compressive strength in 24 hours and
5,000 psi (34.5 MPa) in 28 days
Easy to Use: Just add water
T es te d in acc or dan ce wi th :